---
title: "Needle Positioning: The Key to a Successful Blood Draw"
url: "https://arizonacollege.edu/blog/needle-positioning-the-key-to-a-successful-blood-draw/"
type: post
date_published: 2013-09-17
date_modified: 2013-09-17
schema:
  @type: Article
language: en-US
word_count: 474
reading_time: 3 min
canonical: "https://arizonacollege.edu/blog/needle-positioning-the-key-to-a-successful-blood-draw/"
categories:
  - AZC Healthcare Programs
topic:
  - Phlebotomy
---

# Needle Positioning: The Key to a Successful Blood Draw

Those training to enter the field of Phlebotomy should know that one of the keys
to a successful blood draw is needle positioning – an improper needle position
is one of the most common causes of blood draw failure. Once trained, a
Phlebotomist can use several simple visual cues to determine if the needle is
positioned correctly in the vein.

The angle of the needle can greatly affect the success of a blood draw. If the
bevel of the needle is resting against the lower or upper wall of the vein,
blood flow can be affected – this problem can easily be fixed by changing the
needle angle. If the needle angle is too shallow, this can cause the needle to
come in contact with the upper wall, resulting in an angle that is too steep,
which can cause the needle to come in contact with the lower wall. To avoid
this, a skilled Phlebotomist will reestablish blood flow by releasing the vacuum
pull on the vein and slightly retracting the needle. Problems can occur when the
needle is inserted into a bend in the vein or at a point where the vein goes
deeper into the skin – both situations are unfortunately difficult to detect.

Another problem that can occur is the needle being inserted too deeply, causing
it to penetrate all the way through the vein. This can occur if the tube holder
is less steady than the tube being pushed onto the needle, or if the angle is
too steep. If the needle position isn’t quickly corrected, a hematoma can form –
this can often be corrected by slightly withdrawing the needle to reestablish
blood flow. While the needle being inserted too deeply can pose a problem,
another common challenge is if the needle isn’t inserted deep enough. If the
needle doesn’t penetrate the wall of the vein, the blood flow will be very slow.
In this case, the phlebotomist should gently push the needle into the vein.

If the vein is not well anchored during needle insertion, the needle can slip to
the side of the vein instead of into the vein. If this occurs, the vacuum can be
preserved and the needle can be redirected into the vein. It is important to
note that the needle should never be moved laterally to find a vein. Lastly, if
the angle of the needle can’t be determined visually, a Phlebotomist can use
their finger to help relocate the vein, repositioning the needle into it.

Interested in
[becoming a Phlebotomist](https://www.arizonacollege.edu/all-programs/medical-assisting/become-medical-assistant/)
? Contact Arizona College today to learn more about our
[Phlebotomy training program](https://www.arizonacollege.edu/all-programs/medical-assisting/)
and other exciting career paths in the field of allied health.

---

_Information in this blog post is accurate as of September 17, 2013._

**Categories:** AZC Healthcare Programs